CF8M Investment-Cast Pump Body with Side Port
Application Compact Pump Body with Side Port
An upper flange, side connection and open supporting frame define the component geometry.
View Case StudyProduct application / Pumps & Valves / Pumps & Valves
Pump Components & Housings
Casting routes, material requirements, machined interfaces and inspection scope are reviewed against each pump component drawing. Explore documented work and the questions that shape an OEM quotation.
Speak to an Engineer
Published project evidence
Real parts. Documented work.
Published case studies connected to this application.
14 connected cases
HT250 Sand-Cast Centrifugal Pump Volute Casing
Application Centrifugal Pump Volute Casing
A curved volute joins the circular inlet region to a flanged outlet. Mounting ears connect the casing to adjacent equipment.
View Case Study
ADC12 Die-Cast Multi-Port Pump Housing
Application Multi-Port Pump Housing with Ribs
A cylindrical housing incorporates a threaded top opening, a side interface and projecting ribs.
View Case Study
CF8M Sand-Cast Centrifugal Pump Volute
Application Flanged Centrifugal Pump Volute
The spiral casing has a circular chamber opening and a separate outlet connection. Finished interfaces interrupt the coated outside surface.
View Case Study
ZG270-500 Sand-Cast Pump Casing with Flanges
Application Cylindrical Pump Casing with Flange Connections
A cylindrical chamber connects to large end flanges and a side opening. The coated exterior remains separate from the machined connection areas.
View Case Study
CF8 Investment-Cast Pump Body with Threaded Ports
Application Pump Body with Two Threaded Ports
Two angled connection bosses sit above a circular pump chamber. The external transitions and chamber opening are visible in the product photograph.
View Case StudyManufacturing review
Key manufacturing requirements
Confirm these points on the drawing and purchase specification.
- Internal flow passagesReview passage geometry and how its formed surfaces will be verified.
- Flange interfacesConfirm mating faces, hole positions and machining allowances.
- Sealing surfacesDefine the finished features and acceptance checks on the drawing.
- Machining datumsPlan how the casting will be located for finishing operations.
- Dimensional requirementsAgree which dimensions need first-article and production checks.
- Wall thicknessReview section transitions together with the selected casting route.
Industries
Related industries
Manufacturing & quality
Project-specific controls start with the drawing
The images below illustrate general manufacturing and inspection activity; they are not records of the CF8 pump project.
Technical resources
Read more about this application
Published articles and videos linked to this application topic.
Explore resources
Is Investment Casting Right for Pumps and Valves?
Assess whether investment casting deserves review for a pump or valve component. Connect service conditions and internal geometry to the…
Read moreQuestions
Questions from OEM teams
What information helps start a pump casting review?
A drawing or model, material specification, expected quantity, operating conditions and critical features help define the review scope.
Are inspection methods the same for every pump casing?
No. Inspection and acceptance criteria depend on the drawing, service requirements and agreed project plan.
Start a project
Discuss your pump casting project
Share the drawing, material direction, expected quantity and critical features for review.
Send an Inquiry