Die Casting
Sand Casting
ADC12 Die-Cast Ribbed Control Box Cover
Application Ribbed Control-Box Cover
A rectangular cover has peripheral fastening bosses and internal reinforcing ribs, including a central cross-shaped rib arrangement.
View Case StudyProduct application / Energy & Renewables
Electrical Housings & End Covers
Custom electrical housings and end covers connect fastening, sealing, cable access and internal clearances. Review the enclosure as part of the equipment assembly, with performance requirements stated on the drawing.
Speak to an Engineer
Manufacturing routes
Applicable manufacturing processes
Published project evidence
Related manufacturing cases
Explore published components connected to this application.
4 connected cases
ADC12 Die-Cast Finned Equipment Cover
Application Finned Equipment Cover
Exterior fins surround a raised central panel on a cover with a shaped fastening perimeter.
View Case Study
A380 Die-Cast Finned Motor Cover
Application Finned Motor Cover
Closely spaced exterior fins follow the curved motor-cover wall. The open rim provides the connection to the mating machine body.
View Case Study
ADC12 Die-Cast Ribbed End Cover Housing
Application Ribbed End Cover Housing
A circular cover contains radial internal ribs, a central opening and an outer fastening perimeter.
View Case StudyManufacturing review
Key manufacturing requirements
Confirm these points on the drawing and purchase specification.
- Cover and enclosureIdentify mounting perimeters, gasket paths, cable entries and any bearing supports on the component drawing.
- Mating faces and fasteningSet functional datums, hole patterns, thread engagement and machining stock without distorting thin edges.
- Cooling and clearancesSpecify fins, ribs, thermal interfaces and assembly clearances. Cooling performance requires separate validation.
- Material and finishAgree the alloy, forming route, coating thickness, masked surfaces and electrical contact areas.
- Product acceptanceDefine dimensional, thread and surface checks. IP, EMC or thermal ratings require validation of the specified assembly.
Materials
Related materials
Industries
Related industries
Questions
Questions from OEM teams
Can an IP rating be assigned from the metal cover alone?
No. The specified enclosure, seals, entries and assembly conditions must be considered in the applicable validation.
Are cooling fins proof of a thermal result?
They are visible design features. A thermal result needs a defined operating condition and documented evaluation.
Start a project
Discuss your enclosure or end cover
Send the component and mating drawings, alloy requirement, mounting and cable interfaces, finish, quantity and any assembly-level validation requirements.
Send an Inquiry