HT250 Sand-Cast Pump Connection Housing
Application Industrial pump connection housing
An HT250 pump connection housing project focused on flange distortion control and stable machining of the central stepped bore.
View Case StudyProduct application / Pumps & Valves / Pumps & Valves
Pump Components & Housings
Casting routes, material requirements, machined interfaces and inspection scope are reviewed against each pump component drawing. Explore documented work and the questions that shape an OEM quotation.
Speak to an Engineer
Published project evidence
Real parts. Documented work.
Published case studies connected to this application.
4 connected cases
HT200 Sand-Cast Small Centrifugal Pump Casing
Application Small centrifugal pump body
An HT200 small pump casing project dealt with venting around the support ribs and machining the base and pump interfaces.
View Case Study
HT200 Sand-Cast Centrifugal Pump Volute
Application Industrial centrifugal pump volute
An HT200 centrifugal pump volute project focused on a clean internal flow passage, flange machining and pressure-tight casting quality.
View Case Study
CF8 Investment-Cast Centrifugal Pump Volute
Application Fluid-handling equipment for ambient-temperature clean water and mildly corrosive service
A CF8 stainless centrifugal-pump volute case covering cavity formation, shrinkage control, pressure testing and the move into repeat supply.
View Case StudyManufacturing review
Key manufacturing requirements
Confirm these points on the drawing and purchase specification.
- Internal flow passagesReview passage geometry and how its formed surfaces will be verified.
- Flange interfacesConfirm mating faces, hole positions and machining allowances.
- Sealing surfacesDefine the finished features and acceptance checks on the drawing.
- Machining datumsPlan how the casting will be located for finishing operations.
- Dimensional requirementsAgree which dimensions need first-article and production checks.
- Wall thicknessReview section transitions together with the selected casting route.
Industries
Related industries
Manufacturing & quality
Project-specific controls start with the drawing
The images below illustrate general manufacturing and inspection activity; they are not records of the CF8 pump project.
Technical resources
Read more about this application
Published articles and videos linked to this application topic.
Explore resources
Is Investment Casting Right for Pumps and Valves?
Assess whether investment casting deserves review for a pump or valve component. Connect service conditions and internal geometry to the…
Read moreQuestions
Questions from OEM teams
What information helps start a pump casting review?
A drawing or model, material specification, expected quantity, operating conditions and critical features help define the review scope.
Are inspection methods the same for every pump casing?
No. Inspection and acceptance criteria depend on the drawing, service requirements and agreed project plan.
Start a project
Discuss your pump casting project
Share the drawing, material direction, expected quantity and critical features for review.
Send an Inquiry