Product application / Pumps & Valves / Pumps & Valves

Pump Components & Housings

Casting routes, material requirements, machined interfaces and inspection scope are reviewed against each pump component drawing. Explore documented work and the questions that shape an OEM quotation.

Speak to an Engineer

Application reference: an industrial pump and its pipe connections.

Published project evidence

Real parts. Documented work.

Published case studies connected to this application.

14 connected cases

Compact water pump housing casting with pipe connection and surrounding mounting bosses

Aluminum AlloysA356

A356 Gravity-Cast Small Engine Water Pump Housing

Application Small-engine cooling water pump housing

A compact A356 water pump housing project addressed cold shuts in thin walls while keeping port and mounting features ready for machining.

View Case Study

Engine water pump body with circular machined opening and peripheral mounting bosses

Cast IronHT250Sand Casting

HT250 Sand-Cast Engine Water Pump Body

Application Heavy-engine cooling water pump body

An HT250 engine water pump body project concentrated on feeding the thick center section and controlling the machined mounting interface.

View Case Study

Pump connection housing with large circular flange, central opening and ribs

Cast IronHT250Sand Casting

HT250 Sand-Cast Pump Connection Housing

Application Industrial pump connection housing

An HT250 pump connection housing project focused on flange distortion control and stable machining of the central stepped bore.

View Case Study

Small centrifugal pump casing with support foot, inlet and upper outlet

Cast IronHT200Sand Casting

HT200 Sand-Cast Small Centrifugal Pump Casing

Application Small centrifugal pump body

An HT200 small pump casing project dealt with venting around the support ribs and machining the base and pump interfaces.

View Case Study

Red coated centrifugal pump volute casting with circular inlet and discharge flange

Cast IronHT200Sand Casting

HT200 Sand-Cast Centrifugal Pump Volute

Application Industrial centrifugal pump volute

An HT200 centrifugal pump volute project focused on a clean internal flow passage, flange machining and pressure-tight casting quality.

View Case Study

Water pump housing casting with broad flange, curved passage and two pipe connections

Aluminum AlloysA356.2

A356.2 Gravity-Cast Water Pump Housing for Heavy Vehicles

Application Heavy-truck engine water pump housing

A heavy-vehicle water pump housing project addressed gas entrapment in a curved flow passage and machining stability at the large flange.

View Case Study

View More Cases

Manufacturing review

Key manufacturing requirements

Confirm these points on the drawing and purchase specification.

Internal flow passagesReview passage geometry and how its formed surfaces will be verified.
Flange interfacesConfirm mating faces, hole positions and machining allowances.
Sealing surfacesDefine the finished features and acceptance checks on the drawing.
Machining datumsPlan how the casting will be located for finishing operations.
Dimensional requirementsAgree which dimensions need first-article and production checks.
Wall thicknessReview section transitions together with the selected casting route.

Materials